Sometimes, all it takes to make old furniture like new again is a little elbow grease, some creativity and a little help from garage and estate sales.
Instead of tossing that old coffee table or end table, upcycle it with a coat of paint and some created, found or purchased art.
Step 1: Prep the base
Sand down the table in preparation for painting. Always go with the grain and never use power tools on wood. You’ll have to use two or three grades of sandpaper, each finer than the first. Start with grade 3/0 as a general rule (go straight to 4/0 for softer woods like pine or poplar). Work up the grades, using 4/0, then 5/0, then 6/0.
Step 2: Stain or paint
Now you’re ready to restain or paint your table. If you’re painting, consider using a coat or two of primer before the paint goes on. Allow each coat to dry thoroughly before applying another.
Learn to stain hardwood floors >>
Step 3: Give it some flair
Measure the top of your table carefully and order glass or plexiglass to cover the top. This will cost somewhere around $100 (for real glass), depending on the size of your tabletop. Don’t forget to ask for or purchase clear rubber dots for the corners of the table. They’ll keep the glass from sliding and protect the painted wood from the glass.
You’ll also want to pick up some decorative artwork. You can find prints and photos at garage or estate sales, make prints from quality pictures on the internet (make sure you use good-quality paper!) or create your own unique art.
Learn more about thrift-store decorating >>
Go with a theme. If you’re repurposing an old living room coffee table for use in your hubby’s new man-cave, for example, look for photos, prints or other flat items themed with his favorite team’s logo and colors. We’ve gone with a vintage advertising theme here.
Place the artwork on the table until it looks the way you want it to. You can go with an abstract (thrown about) pattern or keep it neat and orderly with a grid. Move the photos and prints around until they’re exactly the way you want them.
Now it’s time to top it with glass (don’t forget those rubber dots!). If you’re careful, there’s no need to permanently affix your prints to the table. That way, you can rearrange them or change the theme of the table as desired. With the help of a friend if necessary, carefully and slowly place the glass over the tabletop so there’s no overhang an any one side. If you mess up, don’t slide the glass, as this will move your prints. Pick it straight up, adjust and try again.
Watch: How to decorate with recycled items
Learn how to reuse items when decorating. This can be both green and budget friendly. On SheKnows.com How To, we learn the art of using off-the-wall items for giving your space that extra pop.