Skip to main content Skip to header navigation

How to repaint your shutters

Repainting the shutters of your home is an inexpensive way to refresh the look of your house, instantly clean up your home’s appearance, and boost curb appeal with a pop of color. Like many home improvement projects, the actual improvement part will take the least amount of time. The key to doing the job well is preparation.

How to paint your shuttersStep 1: Pick a color.

Choosing the right color for your home is the all-important first step to painting your shutters. The traditionalist approach is to match your shutters to your roof color. If you have a dark gray or black roof, then black shutters will most likely look nice; if you have a brown roof, then dark brown shutters are a great choice. If your home has small windows, a lighter color that blends with the house color might work better.

Step 2: Pick your paint.

The material of your shutters is the key to selecting the best type of paint for the job. Acrylic paint that contains urethane resins works best with vinyl, and exterior latex paint works best with wood.

Step 3: Prepare your workspace.

Find a good work area outside in the shade that’s protected from wind gusts. Lay a drop cloth under your work area to avoid staining plants, grass, patio or the garage. Once you have your work area ready, remove the shutters from the windows.

Step 4: Begin shutter prep.

Remove existing paint from the shutters with a paint scraper. If you cannot remove all of the old paint with the scraper, use a liquid paint stripper. Just as for paint selection, find a paint stripper that works best with your shutters’ material. Use a paintbrush to apply a light coat of the liquid to the shutters. Allow at least 30 or 40 minutes for the paint stripper to work on the old paint, and then scrape the shutters once again.

Step 5: Give your shutters a good scrub.

Using a scrub brush, thoroughly wash the shutters with hot water and soap to remove dirt, debris and residual paint stripper. Rinse the shutters with a garden hose. Place vinyl shutters on the drop cloth and allow to air dry. To avoid damage to wood shutters, towel dry immediately after cleaning.

Step 6: It’s prime time.

This is the last step before painting. Lightly roughen the surface of the shutters with sandpaper so the paint will adhere evenly. Wipe away debris with a tack cloth, and then prime with a spray can or paint gun to ensure a light, even coat.

Step 7: Paint away.

Apply at least two coats, and allow plenty of dry time between each coat. Make sure that the final coat of paint is completely dry before you return the shutters to their windows to avoid smudging, chipping or smearing.

Now, all that’s left to do is to kick back and relax as your neighbors stand in awe of your home’s renewed beauty.

- - - - - - - - - - - - - -

For more info on this topic...For more decorating ideas, check out:
Home décor & interior design photo galleries

Leave a Comment

Comments are closed.