How To...
Sew Simply

It’s happened to all of us before -- you’re out and about, having a fabulous time with your friends, when... oh no! All of a sudden you realize there’s a huge hole in your brand new top, or worse -- your favorite pair of pants! No need to panic, though. Here’s what to do if you ever find yourself in a similar predicament.

Step 1: Remove the garment

Remove garment

Once you see that there's a rip, tear or any sort of hole in your pants or shirt, remove the garment and turn it inside out, advises Jennifer Dayan, founder of online shopping destination I Found A Secret. Obviously this is easy to do if you're at home, but if you're in public and happen to have all the right tools on you (a needle and some matching thread mostly), head on over to the bathroom and set up shop.

Expert tip

Have no clue where to find a needle and some matching thread in an emergency? "I always carry my tiny Minimergency Kit with over 16 must-haves in my bag," says Jennifer.

Step 2: Pinch the hole together

Sewing seam

"Locate the hole on your garment, and pinch together the fabric where the rip is so that the opening meets the seam," says Jennifer. Leave a little bit of room -- about half an inch -- so you can hold tight while sewing.

Step 3: Sew it up

Sewing seam

With matching thread, push your needle into the fabric and back out the other end. Continue doing this until the hole is completely closed up, advises Jennifer. "Use a ruler or chalk to help you maintain a straight line, and try to match the original stitch that was used in the garment." Finally, once you're done sewing, tie a knot to keep the thread in place. Voila, all done! Now you can head back to the party.

- - - - - - - - - - - - - -

For more info on this topic...For more DIY tips, check out:
How to save money by sewing

Tags:

Comments

Comments on "How to fix a seam"

Kim June 22, 2012 | 11:59 AM

Wow, this wasn't that helpful at all. For any of you who are sewing back a seam, there's a couple things to watch out for. You can't just push your needle in and out. The biggest thing is to make sure the fabric doesn't bunch up, or your seam is going to look lumpy. If you can, stretch the fabric out over something so it's tight and doesn't have the slack to bunch.

+ Add Comment


(required - not published)